116 of 152 PSS5000/TEMA/803046/05
PSS 5000 – Technical Manual
9 W&M (Menu W)
9.7.5 Trans Memory (Menu W.7.5)
To activate trans
memory errors with web
service pages
The procedure used here is the same procedure as is used to check all the de-
vices, see ‘To activate checking devices with web service pages’ on page 112.
To activate checking
Transaction Memory with
local service panel
This procedure describes how to activate the built-in checking device that
makes sure that the Transaction Memory checking facility is operating cor-
rectly.
1. Press to move to the LAM VERSION W.1 menu.
2. Press , , , , , to move to the CHECKING DEVICES W.7
menu.
3. Press , , , , to move to the TRANS MEMORY W.7.5 menu.
4. Press to move to the TRANS MEMORY menu.
5. Use the and buttons to toggle between ON and OFF.
When the TRANS MEMORY value is
ON, this simulates that the memory
has an error and the PSS 5000 must react accordingly.
6. Return the checking device setting to OFF before you leave the PSS 5000.
Failure to do this will result in the PSS 5000 not operating correctly.
To Next Page
Loading...
Need help?
General
