PSS5000/TEMA/803046/05 127 of 152
PSS 5000 – Technical Manual
C Web Service Connections
dem and store the configuration, refer to the user documentation for the mo-
dem.
The modem must be configured to use Full Handshake support and the Baud
rate must have the same setting as defined in ‘5.3.2 Service Port Setup (Menu
2.3.2)’ on page 40.
C.3.2 Null Modem Connection
Description of null
modem connections
A null modem connection enables a PC to connect directly to the Service Port
of the PSS 5000 using a serial cable. A null modem connection involves the
following procedures:
Note: Windows Vista does not support null modem connections.
Note: A null modem driver is available from the PSS 5000 Development CD.
C.3.3 Installing Null Modem Connections
To install null modem on
a PC using Windows
2000
This procedure describes how to install null modem on a PC that uses Win-
dows 2000.
1. Select Start → Settings → Network and Modem Connections → Create New
Connection
.
The
Control Panel window appears.
2. Double-click Phone and Modem Options.
The
Phone and Modem Options window appears.
3. Select the Modems tab.
4. Click Add.
The
Add Hardware Wizard window appears.
5. Select Don’t detect my modem; I will select it from a list. and click Next.
The
Install New Modem page of the wizard appears.
6. In the Manufacturer list, select Standard Modem Types and in the Models list
select
Communications cable between two computers and click Next.
7. Select Selected Ports radio button and select the communication port (for
example, COM1). Click
Next.
Step Procedure
1. Connect the PC to the PSS 5000 using a null modem cable. See
• ‘To install null modem on a PC using Windows 2000’ on page 127, or
• ‘To install null modem on a PC using Windows XP’ on page 128
2. Create a null modem connection from the PC. See:
• ‘To create a null modem connection on a PC using Windows 2000’ on
page 128, or
• ‘To create a null modem connection on a PC using Windows XP’ on page
129.
3. Configure the null modem connection to enable communication between the
PC and the PSS 5000 and then connect. See ‘To configure the null modem
connection properties’ on page 129.
To Next Page
Loading...
