PSS5000/TEMA/803046/05 129 of 152
PSS 5000 – Technical Manual
C Web Service Connections
7. Select Selected Ports radio button and select the communication port (for
example, COM1). Click
Next.
8. Click Finish to complete the hardware installation.
The wizard closes and returns to the
Phone and Modem Options window.
9. Click OK. The setup is now saved and ready.
To create a null modem
connection on a PC
using Windows XP
This procedure describes how to create a null modem connection on a PC that
uses Windows XP.
1. Select Start → Settings → Control Panel.
The
Control Panel window appears.
2. Double-click Network Connections.
The
Network Connections window appears.
3. Select the File → New Connection....
The
New Connection Wizard window appears.
4. Click Next.
The
Network Connection Type page of the wizard appears.
5. Select Set up an advanced connection and click Next.
The
Advanced Connection Options page of the wizard appears.
6. Select Connect directly to another computer and click Next.
The
Host or Guest page of the wizard appears.
7. Select the Guest radio button and click Next.
The
Connection Name page of the wizard appears.
8. Type in a name that identifies the connection, for example PSS 5000 and
click
Next.
The
Select a Device page of the wizard appears.
9. In the Select a device drop-down list, select Communications cable between
two computers (COM1)
and click Next.
The
Connection Availability page of the wizard appears.
10. Select the Anyone’s use radio button and click Next.
The
Completing the New Connection Wizard page appears.
11. Click Finish to complete the connection.
The wizard closes and the
Connect <connection name> window appears.
You are now ready ‘To configure the null modem connection properties’
on page 129. Go to Step 2.
To configure the null
modem connection
properties
This procedure describes how to configure the null modem connection be-
tween the PC and a PSS 5000.
1. Select Start → Settings → Network Connections → <connection name>.
The
Control Panel window appears.