88 of 152 PSS5000/TEMA/803046/05
PSS 5000 – Technical Manual
8 Diagnostics (Menu 5)
1. Select 5 Diagnostics → 5.2 System Logs → 5.2.1 Upload Log.
The
Upload Log page appears.
2. Use the list of upload entries to see when the uploads occurred, the software
versions and who made the uploads.
To view the Upload Log
with local service panel
This procedure describes how to use the Service Menu in the local service pan-
el to view the upload log.
1. Press to move to the INFORMATION 1 menu.
2. Press , , , , , , to move to the UPLOAD LOG 5.2.1 menu.
3. Press enter the upload log.
4. Use the navigation buttons, & to move vertically and & to
move horizontally around the log data.
For more details about viewing data, see ‘Viewing data in the Local Service
Panel display’ on page 22.
5. Press OK to exit the log data.
To view the upload log
file
The upload log data is stored in: /pss_mem/1/sys/bul.txt. Use FTP to access
this file and read the contents.
For information about starting an FTP session, see ‘2.2.5 FTP Server’ on page
18.
8.2.2 Reset Logs (Menu 5.2.2)
Description of Reset
Logs menu
There are 3 types of reset. Therefore, there are 3 types of reset logs:
•
Soft
• Master
• Super Master
These logs tell when the specific reset type occurred and the cause of the reset.
To Next Page
Loading...
Need help?
General
