74 of 152 PSS5000/TEMA/803046/05
PSS 5000 – Technical Manual
7 Reset (Menu 4)
3. Press to select the MASTER RESET? menu.
4. Press and hold OK for 10 seconds.
The system performs a master reset. The display shows
OK MASTER RE-
SET...
.
7.3 Super Master Reset (Menu 4.3)
Description of a super
master reset
The Super Master Reset simply clears all the memory. All configuration data
and parameters, such as Port assignments, return to their default values.
Note: When a Super Master Reset occurs, the contents of the virtual file sys-
tem pss_mem/4, pss_mem/3 and pss_mem/2 are cleared.
To make a super master
reset with web service
pages
This procedure describes how to use the Service Menu in the web browser to
make a Super Master Reset.
1. Select 4 Reset → 4.3 Super Master Reset.
The
Super Master Reset page appears.
2. Type ACCEPT in the empty field.
3. Click SUPER MASTER RESET.
All configuration settings return to their default values.
To make a super master
reset with local service
panel
This procedure describes how to use the Local Service Panel to make a Super
Master Reset.
1. Press to move to the INFORMATION 1 menu.
2. Press , , , , to move to the SUPER M RESET 4.3 menu.