Doms PSS 5000 - 8.1.3 Price Pole Test (Menu 5.1.3)

80 of 152 PSS5000/TEMA/803046/05
PSS 5000 – Technical Manual
8 Diagnostics (Menu 5)
3. Press the buttons in the sequence shown below to move to the sub-menus
and view which devices are connected to the individual ports.
4. Use and to select the correct Device Type and Device ID.
The details for the error (date, time and error code) are displayed.
Note: If no errors are present, then a NO ERRORS message appears.
8.1.3 Price Pole Test (Menu 5.1.3)
Description of the price
pole test
Two special features have been implemented to test Price Poles. One is a seg-
ment test for the price poles and the other is a simple command to re-send the
last prices.
To start a price pole test
with web service pages
This procedure describes how to use the Service Menu in the web browser to
test the price pole.
1. Select 5 Diagnostics → 5.1 Forecourt Devices → 5.1.3 Price Pole Test.
The
Price Pole Test page appears.
2. Click START PRICE POLE TEST.
The price pole test starts.
To start a price pole test
with web service pages
This procedure describes how to use the Service Menu in the web browser to
test the price pole by updating the prices shown on the pole.