PSS5000/TEMA/803046/05 27 of 152
PSS 5000 – Technical Manual
4 Information (Menu 1)
4 Information (Menu 1)
Overview of Information
menu
The Information menu is divided into the following sub-menus:
• ‘4.1 Program Versions (Menu 1.1)’ on page 27
• ‘4.2 Board Info (Menu 1.2)’ on page 28
• ‘4.3 SW Blocks (Menu 1.3)’ on page 31
• ‘4.4 Protocols (Menu 1.4)’ on page 31
• ‘4.5 LAM (Menu 1.5)’ on page 32
Note: For all Local Service Panel procedures, it is assumed that the Idle menu
(see ‘Local Service Panel display’ on page 22) is already shown in the
display.
4.1 Program Versions (Menu 1.1)
Description of the
Program Versions menu
The Program Versions menu provides information about the version and re-
lease date of the following programs:
• Application Program
•Boot Program
• LAM (Legal Authority Module)
If the program versions are not correct then it may be necessary to change
them. A description of how to do this is included in ‘3.2 Software Changes’ on
page 24.
To view program
versions with web
service pages
This procedure describes how to use the Service Menu in the web browser to
view the program version information.
1. Select 1 Information → 1.1 Program Versions.
The
Program Versions page appears.
2. Use the information on this page to read the version numbers for the soft-
ware components: BOOT, LAM and APPLICATION.
To view program
versions with local
service panel
This procedure describes how to use the Local Service Panel to view the pro-
gram version information for the software components: BOOT, LAM and AP-
PLICATION.
To Next Page
Loading...
Need help?
General
