18 of 152 PSS5000/TEMA/803046/05
PSS 5000 – Technical Manual
2 System Description
and connected to the PSS. The program works very closely with the LAM to
make sure that only permitted data is obtained.
The program type ID for the application program is not limited to a single
number. For example, the program type number (TTT) can be one of the fol-
lowing: 410, 411 or 420.
The program branch number (BB) depends on which functions that are includ-
ed in the program.
2.2.4 Web Server
Description of the web
server
The embedded web server enables you to access the PSS 5000 Service Menus
using a PC with a standard web browser.
This provides a user-friendly graphics interface for the Service Menus, where
you are able to perform a multitude of tasks, such as obtaining software ver-
sion numbers, installation details, operational details and service diagnostics.
It is also an excellent entry point to the W&M menus.
Recommended browser
versions
The embedded web server, which allows connection via standard browsers or
specific applications, has been tested with both Firefox and Microsoft brows-
ers. Some of the features (for example the Peeper applet) require a Microsoft
Internet Explorer version 6.0 or higher, or Firefox version 1.5 or higher.
2.2.5 FTP Server
Description of the FTP
server
The FTP server enables you to connect to the PSS 5000, see the internal file
structure and upload software applications. It also enables you to extract data
logs from remote locations.
Illustration of an FTP
connection to file system
in PSS 5000
This illustrates how to access the file system in a PSS 5000 using a web brows-
er and an FTP connection. The FTP connection to the PSS 5000 is made by
typing
FTP://admin:password@<IP address>.
Note: Other types of FTP client connections may be used. Use the same log
on information with the FTP client of your choice.
To Next Page
Loading...
Need help?
General
