PSS5000/TEMA/803046/05 33 of 152
PSS 5000 – Technical Manual
5 Installation (Menu 2)
5 Installation (Menu 2)
Overview of Installation
menu
The Installation menu is divided into the following sub-menus:
• ‘5.1 Protocol to Port Assignment (Menu 2.1)’ on page 33
• ‘5.2 Date and Time (Menu 2.2)’ on page 36
• ‘5.3 Communication Setup (Menu 2.3)’ on page 37
• ‘5.4 System Profile (Menu 2.4)’ on page 46
• ‘5.5 Application Setup (Menu 2.5)’ on page 51
• ‘5.6 Software Upload (Menu 2.6)’ on page 53
• ‘5.7 Peripheral Configuration (Menu 2.7)’ on page 57
• ‘5.8 Backup (Menu 2.8)’ on page 59
5.1 Protocol to Port Assignment (Menu 2.1)
Description of the
protocol to port
assignment menu
The PSS 5000 application can use a large number of protocols with which to
communicate with the other system devices.
From the factory, one or more protocols are assigned to each port on the CPU
board. Each assignment can be changed using the Service menus.
Note: See ‘5.1.1 Limitations’ on page 35 for a description of the limitations
associated with the Protocol to Port assignments.
To view/change protocol
to port assignment with
web service pages
This procedure describes how to use the Service Menu in the web browser to
view/change the Protocols to Port Assignment values.
To Next Page
Loading...
Need help?
General
