PSS5000/TEMA/803046/05 51 of 152
PSS 5000 – Technical Manual
5 Installation (Menu 2)
To change the web
preferences
This procedure describes how to use the Service Menu in the web browser to
change the appearance of the web pages and the rate by which information is
updated from the PSS 5000.
1. Select 2 Installation → 2.4 System Profile → 2.4.4 Web Preferences.
The
Web Preferences page appears.
2. To insert a logo/graphic in the top left-hand corner of the web page, click
Browse in the Custom Logo group.
The
Choose file window appears.
3. In the Choose file window, locate the graphic file you want to include in the
web page.
4. Click Open to include the path to the graphic file in the field next to the
Browse button.
5. Do one of the following:
• If you want to change the refresh rate parameters, go to Step 6.
• If you want to include the new logo/graphic now, go to Step 7.
6. In the Parameters group, type in the new refresh rate (in seconds).
7. Click OK to save and implement the changes.
5.5 Application Setup (Menu 2.5)
To set/change the
application setup
During installation, various application dependent functions might be config-
urable using the
Application Setup menu – the specific applications determine
what is actually configurable.
To Next Page
Loading...
Need help?
General
