120 of 152 PSS5000/TEMA/803046/05
PSS 5000 – Technical Manual
A File Formats in the PSS 5000
The table below explains what is represented by the values in the different columns of
the transaction data.
A.3 Upload Log File Format
Upload log file format The figure below is an example of part of an upload log file.
Note: The name and location of the file is: /pss_mem/1/sys/bul.txt
The table below explains what is represented by the values in the different columns of
the log.
Column Explanation
1 W&M character. "¤" indicates that the security telegram is intact.
2 Date of the transaction. Date has the format: yy-mm-dd.
3 Time of the transaction. Time has the format: hh:mm:ss.
4 Transaction sequence number.
5 Number of pump where transaction occurred.
6 Transaction grade ID.
7 Volume price. The currency unit and volume units are determined by the
LAM.
8 Total volume of the transaction. A measured value from the pumps. The
volume unit is determined by the LAM.
9 Total cost for the transaction. This value comes from the pumps.
10 Type of Payment. C indicates that a card payment occurred. N indicates
that a banknote payment occurred.
11 Prepaid monetary value.
12 Station ID or name.
Column Explanation
1 Recorded sequence number. Starts from 000
2 Date of the record. Date has the format: yyyy-mm-dd.
3 Program Category. Can be either LAM or APL.
4 Program Type.
5 Program branch.
To Next Page
Loading...
Need help?
General
