72 of 152 PSS5000/TEMA/803046/05
PSS 5000 – Technical Manual
7 Reset (Menu 4)
7 Reset (Menu 4)
Overview of Reset menu The Reset menu is divided into the following sub-menus:
• ‘7.1 Soft Reset (Menu 4.1)’ on page 72
• ‘7.2 Master Reset (Menu 4.2)’ on page 73
• ‘7.3 Super Master Reset (Menu 4.3)’ on page 74
7.1 Soft Reset (Menu 4.1)
Description of Soft Reset Activating the Soft Reset will have the same effect as a short power off. The
system stops for a short period and the hardware and communication drivers
are re-initialized, but the state of the operation starts from where it was
stopped.
Note: When a Soft Reset or power down occurs, the contents of the virtual file
system pss_mem/4 is cleared.
To make a soft reset with
web service pages
This procedure describes how to use the Service Menu in the web browser to
make a soft reset.
1. Select 4 Reset → 4.1 Soft Reset.
The
Reset page appears.
2. Click RESET.
The hardware and communication drivers are re-initialized and the soft-
ware continues from where is was stopped.
To make a soft reset with
local service panel
This procedure describes how to use the Local Service Panel to make a soft
reset.
1. Press to move to the INFORMATION 1 menu.
2. Press , , , to move to the SOFT RESET 4.1 menu.
To Next Page
Loading...
Need help?
General
