Page 21 of 112
DMM-0200 Product User Guide
159 Swanson Road
Boxborough, MA 01719
Tel: 508-475-3400
Email: sales@dovermotion.com
Caution: To avoid overheating, always operate the DMM-0200 with the enclosure cover on to allow
for proper air flow through it.
Note: Removing the enclosure cover is only necessary for troubleshooting.
Description
The DMM-0200 can control stepper motors. The figures in this section will describe the axis configurations for the
DMM-0200 as well as interfacing with the controller.
Figure 2 DMM-0200 ISO View
To Next Page
Loading...
