Dover DMM-0200 - Chapter 6 - Running the DMM-0200 Via Front Panel Buttons; About this Chapter; Introduction; Topics

Page 55 of 112
DMM-0200 Product User Guide
159 Swanson Road  Boxborough, MA 01719  Tel: 508-475-3400  Email: sales@dovermotion.com
Chapter 6
Running the DMM-0200 via Front Panel Buttons
About This Chapter
Introduction
This chapter describes how to run the DMM-0200 via the Front Panel Thumb Wheel and Start/ Jog+, Stop/ Jog-
buttons for standalone operation. The sample motion programs installed from the factory are also described in
greater detail.
Topics
This chapter covers the following topics:
Topic
Page
Front Panel Buttons
56
DMM-0200 Stored programs
57
Executing Stored Programs
57
Where to Go Next
58