Page 38 of 112
DMM-0200 Product User Guide
159 Swanson Road
Boxborough, MA 01719
Tel: 508-475-3400
Email: sales@dovermotion.com
Where to Go Next
Continue with the next chapter,
Chapter 4 - Instaling the Application Software for the DMM-0200. After hooking up the
DMM-0200 to the stages, the user should now be able to install the application software, PMX-2EX-SA Software and
start communicating to the DMM-0200. The next section describes the steps needed to properly install the application
software.
Note: Using the PMX-2EX-SA Software is not required in order to communicate to the DMM-0200. The user may use
Labview, Matlab, or a number of other software to communicate to the DMM-0200 through USB connection.
To Next Page
Loading...
