Dover DMM-0200 - About this Guide; Chapters and Appendixes in this Guide; Introduction; Topic Page

Page 9 of 112
DMM-0200 Product User Guide
159 Swanson Road  Boxborough, MA 01719  Tel: 508-475-3400  Email: sales@dovermotion.com
About This Guide
Introduction
This guide describes the installation of the DMM-0200 and the operation of it. The intended audiences are the customer,
technician responsible for performing the installation and preparing the site beforehand, and the operator running the
system.
This point forward, “About This Guide,” covers the following topics.
Topic
Page
Information about the DMM-0200
10
Symbols
10
Regulatory Compliance Certification
11
Contact Information
12
Chapters and Appendixes in This Guide
This guide contains the following chapters. It does not cover advanced topics such as debugging the system or editing
configuration files.
For
Go to page
Chapter 1
Site Planning
Describes the responsibilities of the customer and the requirements for the
installation site, and includes an installation process flow and installation procedure
checklist.
13
Chapter 2
Technical Overview
Describes the functionality of the DMM-0200 and its main components.
19
Chapter 3
Instaling the DMM-0200
Describes how to install the DMM-0200 into your system.
35
Chapter 4
Instaling Application Software for the DMM-0200
Explains how to install application software on your PC.
39
Chapter 5
Running the DMM-0200 via PMX-2EX-SA Software
Explains how to run the DMM-0200 using only the GUI on your PC.
43
Chapter 6
Running the DMM-0200 via Front Panel Buttons
Explains how to run the DMM-0200 using only the front panel buttons.
55
Chapter 7
Editing Programs
Explains how to edit stored programs.
59
Chapter 8
Interactive Commands & USB Communications
Describes the USB communications and ASCII commands to interactively
communicate to the DMM-0200.
88
Appendix
Supporting documentation for the DMM-0200 manual
110