Dover DMM-0200 - Rear Panel Connectors & Switches; Table 5 Rear Panel Connectors; Table 6 Rear Panel Switches & Jumpers

Page 24 of 112
DMM-0200 Product User Guide
159 Swanson Road  Boxborough, MA 01719  Tel: 508-475-3400  Email: sales@dovermotion.com
Rear Panel Connectors & Switches
The following table lists the connector positions on the rear panel and the type of connector for each.
Table 5 Rear Panel Connectors
Connector Position
Description
Connector Type
J4-SERIAL X
Serial data communications, Axis 1, X-axis
DE-9-M
J21-SERIAL Y
Serial data communications, Axis 2, Y-axis
DE-9-M
J10-ENC/LIM X
Encoder/Limits, Axis 1 (positions and limits for X-axis)
HD-15-F
J24-ENC/LIM Y
Encoder/Limits, Axis 2 (positions and limits for Y-axis)
HD-15-F
J11-MOTORX
Motor, Axis 1 (motor for X-axis)
DE-9-F
J26-MOTOR Y
Motor, Axis 2 (motor for Y-axis)
DE-9-F
J25-ENC OUT X/Y
Encoder out, Axis 1 & 2, X/Y axis
DA-15-M
J18-DIGITAL I/O
Opto-isolated inputs and outputs
DB-25-F
J19-ANALOG I/O
JOYSTICK
Joystick connection
DA-15-F
USB
USB communications, all axis
USB
AC IN
AC Power
NEMA-5-15P
The following table lists the switches and jumpers on the rear panel.
Table 6 Rear Panel Switches & Jumpers
Switch/Jumper Position
Description
SW1 CUR X
Current limit DIP switch for X axis stepper
SW2 CUR Y
Current limit DIP switch for Y axis stepper
JP1
Rear panel SPDT relay enable/disable
JP2
N/A
JP3
Front panel PROGRAM SELECT enable/disable
JP4
Front panel PROGRAM SELECT enable/disable
JP5
Front panel PROGRAM SELECT enable/disable
JP6
Front panel PROGRAM SELECT enable/disable
JP7
Front panel START button enable/disable
JP8
Front panel STOP button enable/disable