Dover DMM-0200 - Page 82

Page 82 of 112
DMM-0200 Product User Guide
159 Swanson Road  Boxborough, MA 01719  Tel: 508-475-3400  Email: sales@dovermotion.com
X10000 ***MoveXAxistoposition 10000
WAITX
X2000Y3000 ;***MoveXto2000andYto3000inlinearinterpolationmove
WAITX
V10 = 1200 ;***Set variable 10 value to 1200
XV10 ;***Move X Axis to variable 10 value
WAITX
Y
Description:
Command: Perform Y axis move to target location
With other Axis moves in the same line, linear interpolation move is done.
Syntax:
Y[value]
Y[variable]
Examples:
Y10000 ;***MoveYAxisto position 10000
WAITY
X2000Y3000 ;***MoveXto2000andYto3000inlinearinterpolationmove
WAITX
V10 = 1200 ;***Set variable 10 value to 1200
YV10 ;***Move YAxis to variable 10 value
WAITY
ZHOME[axisI[+ or-I
Description:
Command: Perform Z-homing using current high speed, low speed, and acceleration.
Syntax:
ZHOME[Axis][+ or -]
Examples:
ZHOMEX+ ;***Z Homes X axis in positive direction
ZHOMEZ- ;***Z Homes Z axis in negative direction
ZOME[axisJ[+ or-J
Description:
Command: Perform Zoming using current high speed, low speed, and acceleration.
Syntax:
ZOME[Axis][+ or -]
Examples:
ZOMEX+ ;***Homes X axis in positive direction
ZOMEZ- ;***Homes Z axis in negative direction