Oxisensor R-15
Disposable adhesive sensor for short and long-term
monitoring of inactive patients weighing more than
50 kg. Preferably used for patients possibly suffering
from severe vasoconstriction or poor circulation.
● Clean the bridge of the nose with the liquid in the
enclosed ampoule – keep away from the eyes.
● Peel off the protective film on the sensor.
● Align the sensor symmetrically on the bridge of the
nose: the two symbols should lie on the bone/cartilage
boundary.
● Press the sensor firmly into place and hold for
10 seconds to ensure good adhesion.
● The R-15 sensor must not be used on patients with
nasal intubation or a mask.
100
Care
Reassembling system
SpO
2
measurement
Applying the sensors
19028970G102
To Next Page
Loading...
