Dräger Cato - Connecting the Cato Ceiling Version

Connecting the Cato ceiling version
1 Swing supporting flap upwards!
2 Press key until DVE reaches lower limit stop.
3 Press key to release the brake of the ceiling and/or
intermediate bearing.
The DVE can then be swivelled.
4 Key for releasing the brake of the head bearing.
The mount for the Cato can now be swivelled.
5 Swing supporting flap down again.
The DVE can no longer be operated via its own
keypad.
● Plug the mains connector of the Cato into the socket
on the DVE.
● Plug the gas withdrawal connectors into the
corresponding withdrawal sockets.
6 Move Cato right up to the mount on the DVE.
Descriptions
Connecting the Cato ceiling version
138
1
2
3
4
5
,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,
,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,@@@@@@ÀÀÀÀÀÀ ,,,,,,
6
22928970230289702312897023228970