121
Technical data
Monitor
Operating parameters
C-Lock ECG synchronization (optional)
Prerequisite for the
ECG synchronization signal ......: Pos. pulse with > 4.5 V and > 10 ms duration to drive 2 mA.
Max. permitted signal delay
in relation to the current
QRS complex ...........................: 40 ms
Signal isolation from
remaining electronics ................: Dielectric strength > 4 kV
Socket for 2-pin pawl-type
connector, dia. 3.5....................: Pin assignment:
Operating parameters
Noise emission ..................................... : Max. 56 dB(A) (as determined in a free field over a reflecting surface)
Protection classes:
SpO2 sensor ....................................... : Type BF electrically isolated from protective earth conductor
Electromagnetic compatibility ............... : Tested to EN 60601-1-2
Classification ...................................... : Class II b
as per Directive 93/42/EEC
Annex IX
UMDNS-Code ..................................... : 10-134
Universal Medical Device
Nomenclature System
Technical documentation available on request
m
signal
ground
07728971
To Next Page
Loading...
