Dräger Cato - Rotary Control; Screen Saver; Screen Structure

Operating concept
Operating concept of the monitor
Screen structure, Screen saver
Rotary control
14
Screen structure
● Status field top:
contains information on the current alarm mode
of the monitor.
● Alarm field top:
indicates any alarms and their priority.
● Graphic field left:
for curves and bar graphs.
● Measured value field right:
for the most important numerical values.
● Operator prompts bottom right:
prompts to guide the operator.
● Softkeys right:
for rapid selection of the functions displayed on the
screen.
Screen saver
If none of the operating elements on the monitor is
operated in »standby« for approx. 2 minutes, the screen
switches off and becomes dark. The yellow LED in the
standby key and the word »standby« on the ventilator
light up. The monitor display is immediately restored as
soon as any key is pressed.
Rotary control
Selection and adjustment with a single control.
For example:
Adjusting the volume of the pulse tone
after calling up the menu of default values via the softkey
»config.« in standby (after entering a code).
● Turn rotary control = selection.
The cursor frame moves horizontally in the dashed
area.
● Press rotary control = confirm selection.
The selection is confirmed and appears in dark type
on a light background. The cursor frame is positioned
over the arrow symbol (
z
) to the next higher menu.
● Turn rotary control = the cursor frame moves vertically
inside the dashed area.
Select pulse tone.
anaesth. gas
warning calibrating
defaults
Standby / Configuration
Alarms inactive!
anaesth. gas
warning calibrating
defaults
pulse tone
0 1 2 3 4 5 6 7 8 9
alarm tone 1 2 3 4 5 6 7 8 9
mode adult Neo.
parameters
record
interfaces
alarm limits
curves
basic configuration
Standby / Configuration
Alarms inactive!
anaesth. gas
warning calibrating
defaults
pulse tone
0 1 2 3 4 5 6 7 8 9
alarm tone 1 2 3 4 5 6 7 8 9
mode adult Neo.
parameters
record
interfaces
alarm limits
curves
basic configuration
Menu for setting
pulse tone volume.
Status field Alarm field
Measured
value field
Operator prompts
Graphic field
Softkeys
002289710032897100428971
00528971
01628970