Dräger Cato - Page 6

The following parameters are monitored:
● Airway pressure.
● Expiratory minute volume.
● Inspiratory O2 concentration.
● Inspiratory and expiratory CO2 concentration.
● Inspiratory anaesthetic concentration.
Optional:
❍ Functional O2 saturation and pulse.
❍ Inspiratory breathing gas temperature with invariable
upper alarm limit.
Accessories
– Patient monitoring
Optional monitor PM 8060 vitara
1)
.
Parameter box for patient monitoring and measure-
ment of the haemodynamic patient values.
● ECG/arrhythmia analysis.
● Pulse rate.
● Respiration.
● Invasive (2 channels) and non-invasive blood
pressure.
● Functional O2 saturation and pulse.
● Body temperature (2 channels).
– Aquapor
1)
for humidifying and heating the breathing gas.
– Secretion aspirator
1)
– Vapor
1)
Anaesthetic vaporiser for halothane, enflurane,
isoflurane and sevoflurane.
– Connection for two "Vapor" anaesthetic vaporisers
1)
– Devapor
1)
Anaesthetic vaporiser for desflurane.
– Anaesthetic gas scavenging system
1)
– Uninterruptible power supply
1)
1) Refer to the separate Instructions for Use for this equipment!
Intended use
Anaesthetic Workstation Cato

Accessories
6