Click any index (8~10) to get the following web page:
Available settings are explained as follows:
Item Description
Multi-PVC/VLAN Channel
8/9/10
Enable – Select to enable this channel.
Disable – Select to disable this channel.
WAN Type The connections and interfaces created in every channel may
select a specific WAN type to be built upon. In the Multi-PVC
application, only the Ethernet WAN type is available. The
user will be able to select the physical WAN interface the
channel shall use here.
General Settings VPI - (Available when WAN Type is ADSL) Virtual Path
Identifier. Contact your ISP or carrier for the appropriate
value.
VCI - (Available when WAN Type is ADSL) Virtual Channel
Identifier. Contact your ISP or carrier for the appropriate
value.
Protocol - (Available when WAN Type is ADSL) Access
protocol used for the ADSL connection. Contact your ISP or
carrier for the appropriate setting.
To Next Page
Loading...
