Vigor2860 Series User’s Guide
132
object.
Set Mail Alert – The system will send out a warning
message to the administrator when the quota is running
out. However, the connection charges will be
calculated continuously.
Set SMS message - The system will send out SMS
message to the administrator when the quota is running
out.
Monthly Some ISP might apply for the network limitation based on the
traffic limit per month. This setting is to offer a mechanism
of resetting the traffic record every month.
Data quota resets on day … – You can determine the starting
day in one month.
Custom This setting allows the user to define the billing cycle
according to his request.
The WAN budget will be reset with an interval of billing
cycle.
Custom – Monthly is default setting. If long period or a short
period is required, use Custom. The period of cycle duration
is between 1 day and 60 days. You can determine the cycle
duration by specifying the days and the hours. In addition,
you can specify which day of today is in a cycle.
Cycle duration: Specify the days to reset the traffic
record. For example, 7 means the whole cycle is 7 days;
20 means the whole cycle is 20 days. When the time is up,
the router will reset the traffic record automatically.
Today is day – Specify the day in the cycle as the starting
point which Vigor router will reset the traffic record. For
example, “3” means the third day of the cycle duration.
After finished the above settings, click OK to save the settings.
To Next Page
Loading...
Need help?
General
