Default session limit - Defines the default session number
used for each computer in LAN.
Limitation List Displays a list of specific limitations that you set on this web
page.
Specific Limitation Start IP- Defines the start IP address for limit session.
End IP - Defines the end IP address for limit session.
Maximum Sessions - Defines the available session number
for each host in the specific range of IP addresses. If you do
not set the session number in this field, the system will use
the default session limit for the specific limitation you set for
each index.
Add - Adds the specific session limitation onto the list above.
Edit - Allows you to edit the settings for the selected
limitation.
Delete - Remove the selected settings existing on the
limitation list.
Administration Message Type the words which will be displayed when reaches the
maximum number of Internet sessions permitted.
Default Message - Click this button to apply the default
message offered by the router.
Time Schedule Index (1-15) in Schedule Setup - You can type in four sets of
time schedule for your request. All the schedules can be set
previously in Application >> Schedule web page and you can
use the number that you have set in that web page.
After finishing all the settings, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
