102
PC Controller Setting
Select a module from the
Slot 4 [L/R]
box and click
NEXT
.
Slitter Module
RTM (Rotary Tool Module)
(option)
Standard Module
If you have selected
CPM (Cross Tool Module)
or
RTM
(Rotary Tool Module)
in the
Slot 2 [L/R]
box in step 5,
select a tool for the selected module from the
Tool
box.
Then click
NEXT
.
CPM (Cross Tool Module)
: Select a tool.
Perf.
,
Micro
,
Sl-Score
RTM (Rotary Tool Module)
: Select a tool for the left
tool and the right tool.
Perf.
,
Micro
,
Sl-Score
,
Score
If you have selected
RTM (rotary tool module (option))
in the
Slot 3 [L/R]
box or
Slot 4 [L/R]
box in steps 6 and
7,
select a tool for each slot in a similar way to step 8.
Select a module from the
Slot 3 [L/R]
box and click
NEXT
.
Slitter Module
RTM (Rotary Tool Module)
(option)
Standard Module
Select a JOB number from the
JOB No
box and click
NEXT
.
You can set from 1 to 250.
REFERENCE
To Next Page
Loading...
