105
2
PC Controller Setting
4
Programming a JOB for DC-646 Via Computer (PC Controller)
Crease
Set the crease positions.
After entering one numerical value, click
NEXT
.
Then enter the next value.
Set all the crease positions, then click
NEXT
.
Enter
0
if there is no crease.
REFERENCE
• center
appears while you are entering the crease
positions.
Click
center
, the fi rst crease can be set in the center
of the distance between the fi rst cut and the second
cut.
• You can set up to 20 crease positions on a document.
Click
FUNCTION
.
The function setting screen appears.
1.
Air Knife
Compressed air is blown out to loosen the documents,
preventing a double feed.
Select
Enable
or
Disable
.
Select
Disable
for light weight documents.
REFERENCE
Select
Enable
when processing documents with
excessive static electricity or heavy weight documents.
The fi rst cut
The second cut
The fi rst crease
position when
clicking
center
.
To Next Page
Loading...
