Duplo DC-646 - Page 140

120
PC Controller Setting
●
Standard Size
:
Select the default size from the
Standard Size
box.
It is recommended that you set the most frequently
used size.
●
Custom Size (Default)
:
Set the default values when using documents of other
size than the standard size.
Enter each value in the
W:
(Width) box and
L:
(Length)
box.
●
REG. Mark
This sets the default position of the REG mark.
1. Enter the default position of the
side mark
in the
S:
box.
2. Enter the default position of the
lead mark
in the
L:
box.
3. Select
Enable
or
Disable
.