121
2
PC Controller Setting
4
Programming a JOB for DC-646 Via Computer (PC Controller)
●
REG. Mark Spec
Select
Standard
or
Bold
.
When using specially treated documents, print a bold
REG mark on them in advance.
REFERENCE
Normally select
Standard
.
If the REG mark cannot be read, select
Bold
.
Guidelines for
REG. mark spec
•
Standard
: 0.4 mm and more
•
Bold
: 2 mm and more
Standard Bold
REFERENCE
●
Enable re-editing Wizard JOB data
:
If you select this check box, the retrieved JOB data is
displayed on the
WIZARD
screen.
If you have programmed the JOB in the
DIRECT
mode
, the JOB data is displayed on the
DIRECT
screen.
If you re-enter the data, which was programmed in
the
WIZARD mode
, on the
DIRECT
screen, it is also
displayed on the
DIRECT
screen.
● PDF Template creator
If you select the
PDF Template creator
check box,
the JOB programmed can be saved as PDF template.
To Next Page
Loading...
