122
PC Controller Setting
Click the
OPTION MODULE
tab.
● Default setting
Select the default setting for modules for slot 2 to slot
4 from each
Slot *
box.
If you have selected
CPM (Cross Tool Module)
,
select a
CPM tool
from the
Tool Left
box.
If you have selected
RTM (Rotary Tool Module)
,
select a
RTM tool
from the
Tool Left
box and
Tool
Right
box.
●
XML file creator
If you select the
XML file creator
check box, the JOB
programmed can be saved as an XML file.
REFERENCE
• JOB that was programmed or edited in the
advanced mode
, the settings for
RTM (rotary tool
module (option))
and
CPM (cross tool module
(option))
are not refl ected in the XML fi le except
Cards per document
information.
• Contact your dealer for the specifi cations of
XML
fi le
.
●
Default setting for the Functions
Select each function setting box.
Air Knife (Enable, Disable)
Fan Save (Max, Mid, Min, Off )
Slitter Guide (Enable, Disable)
Cut Trim Setting (Full Bleed Mode, No Bleed
Mode, Process All)
Crease Depth (Max, Mid, Min)
Speed (Fast, Slow)
Auto Trail Cut (Enable Disable)
Side Blow Fan (Option: ASIA, TAIWAN)(Max,
Mid, Min, Off )
To Next Page
Loading...
