Performance description
Operating manual 867 Version 01.0 - 12/2012 11
3 Performance description
3.1 Features
The Dürkopp Adler 867 is a flatbed sewing machine for double
lockstitches.
General technical characteristics
• Large or extra-large vertical hook
• Transport: Lower transport, needle transport and alternating
foot-upper transport
• DC drive for all submodels
• Safety snap-on coupling for preventing any misadjustment of
or damage to the hook in the event of a thread jamming
• Automatic wick lubrication for machine and hook with oil
level indicator at the column
• Maximum passage with ventilated sewing feet: 20 mm
• Residual thread length with automatic thread cutter approx.
15 mm, with short thread cutter approx. 5 mm
Characteristics of the individual submodels
Depending on the respective submodel, the product is available
• as a 1-needle or 2-needle machine
• with or without an edge cutter
• with or without an automatic thread cutter
• with or without a keypad on the machine arm and additional
switch for quick functions
• DLC coating of needle bar, thread presser bar and transport
foot bar for oil-reduced operation
• Slip coating of needle plate and needle plate slides for
reduced friction
Submodels with integrated motor
Submodels with the -M suffix have a direct drive mounted on the
arm shaft. On ECO machines the controller is integrated into the
motor cover. CLASSIC machines have a separate controller under
the table plate.
Submodels of long arm machines
Submodels of long arm machines have suffixes of -70 or -100,
which specify the length of the arm throat.
To Next Page
Loading...
Need help?
General
