Performance description
12 Operating manual 867 Version 01.0 - 12/2012
3.2 Declaration of conformity
The machine complies with the European regulations specified in
the declaration of conformity or in the installation declaration.
3.3 Intended use
The Dürkopp Adler 867 is intended for sewing moderately heavy
to heavy material.
Depending on the submodel the following needle sizes are to be
used:
• Light to moderately heavy material: 80 – 110 Nm
• Moderately heavy material: 110 – 140 Nm
• Heavy material: 140 – 180 Nm
The maximum sewing material thickness is 10 mm of pressed-
together sewing material under the sewing foot.
The machine is only intended for processing dry material.
The sewing material must not contain any hard objects.
The sewing machine is intended for industrial use.
The manufacturer will not be held liable for damage resulting from
improper use.
3.4 Technical data
3.4.1 Noise emission
Workplace-specific emission value as per
DIN EN ISO 10821:
867-190322 LC = 79 dB (A)
At: • Stitch length: 6 mm
• Sewing foot stroke: 1.5 mm
• Number of stitches: 2400 min
-1
• Sewing material: 4-layer material G1 DIN 23328
To Next Page
Loading...
Need help?
General
