About this manual
Operating manual 867 Version 01.0 - 12/2012 5
1 About this manual
1.1 Scope of application of the manual
This operating manual describes the set-up and intended use of
the special sewing machine 867.
It applies to all submodels listed in Section 3.4 Technical data.
1.2 Applicable documentation
The device contains built-in components of other manufacturers,
e.g. drive motors. The corresponding manufacturers have per-
formed a hazard assessment for these purchased parts and con-
firmed compliance of the design with the European and national
specifications. The intended use of the built-in components is
described in the corresponding manuals of the manufacturers.
1.3 Damage during transport
Dürkopp Adler cannot be held liable for any damage during trans-
port. Check the delivered product immediately after receiving it.
Report any damage to the last transport manager.
This also applies if the packaging is not damaged.
Keep the machines, devices and packaging material in the con-
dition they were at the time when the damage was identified. That
secures any claims towards the transport company.
Report all other complaints to Dürkopp Adler immediately after
receiving the product.
1.4 Limitation of liability
All information and notes in this operating manual have been
compiled in accordance with the latest technology and the appli-
cable standards and regulations.
The manufacturer accepts no liability for any damage due to:
• Failure to observe the instructions in the manual
• Improper use
• Unauthorized modifications to the machine
• The deployment of untrained personnel
• Damage during transport
• Using spare parts not approved
To Next Page
Loading...
Need help?
General
