DURKOPP ADLER 867 Operating Manual

Set-up instructions
Operating manual 867 Version 01.0 - 12/2012 95
7.12.4 Connecting the controller
Connecting the controller consists of the following work:
• Insert the plugs of all connecting cables in the sockets on the
back of the control.
• Connect the control to the power supply using the power
cable.
Read the  Operating manual for the respective controller:
• Efka DC1550/DA321G controller:
The operating manual is provided in the controller accessory
pack.
• DAC ECO and DAC CLASSIC controllers:
The operating manual is provided in the controller accessory
pack. The operating manual is also available in the download
area at www.duerkopp-adler.com.
Figure 66: DAC CLASSIC connection sockets
Danger to life due to electric shock.
Disconnect the power plug before connecting the
controller.
Make sure the power plug cannot be unintention-
ally reinserted.
DANGER

DURKOPP ADLER 867 Specifications

General

Stitch Type	Lockstitch
Max Stitch Length	12 mm
Needle System	134-35
Needle Thread Tension	Adjustable
Lubrication	Automatic
Type	Industrial Sewing Machine
Max Sewing Speed	3000 stitches per minute
Presser Foot Lift	20 mm
Power Requirements	230V/50Hz