Replacement
Behavior of replacement function
Setting Description
Manning
> Tick checkbox for empirical discharge calculation according to Manning and enter
corresponding parameters (see 11.1).
MaxW / MinW
>Enter minimum / maximum value for water level.
Slope
> Enter value for channel slope.
(dimensionless: Δy / Δx; see below)
n-factor
> Enter specific roughness coefficient n for channel material. (Manning Coefficient)
("Roughness Coefficients" on page 109)
Click Apply to save settings
Programming
Page 60 March 2021HYB-UM-03155-EN-03
To Next Page
Loading...
