Modem Configuration
GSM Config (continued)
Network profiles: By clicking this button it is possible to choose a cellular network profile
from a preinstalled list.
Roaming: This switch enables or disables the data roaming. With data roaming
switched off, the router will not establish a connection when the
cellular module is located outside of the home network. In the factory-
programmed settings, the roaming is deactivated.
PIN entry: The PIN is requested when the SIM is inserted for the first time and
generally must not be changed. If needed, change or set the PIN of the
SIM card using the PIN dialog window.
Data volumes: The volume counter displayed in the status bar at the bottom indicates
the amount of data transferred with the SIM card in mega-bytes
(downloaded/uploaded) since the last reset. The counters can be reset
clicking the "Reset counters" button.
User: This field sets the username to be used if authentication is required to
establish a data connection to the cellular network.
Password: This field sets the password to be used if authentication is required to
establish a data connection to the cellular network.
Authentication: This field sets the authentication procedure selection (PAP, CHAP, no
authentication).
DNS1: This field specifies a static domain name server.
DNS2: This field specifies a second static domain name server.
OTE: N The cellular network profile and configuration is tied to the individual SIM card.
WLAN AP
"WLAN AP" configures the WiFi access point connectivity.
Programming
Page 82 March 2021HYB-UM-03155-EN-03
To Next Page
Loading...
Need help?
General
