B-1
Above Ground Model 200iX/250iX Motorcycle Dynamometer Installation Guide
APPENDIX B
P
OWER
R
EQUIREMENTS
AND
I
NSTALLATION
This appendix contains power requirements and installation instructions for the dyno.
To ensure safety and accuracy in the procedures, perform the procedures as they are
described. Be sure to read and understand the warnings included in this appendix.
Note: The following instructions are intended as a guide to aide in the electrical
installation of your dynamometer. All local regulations shall supersede any
instructions herein and should always be considered.
This Appendix is divided into the following categories:
• North America, Japan, and Locations Using 60 Hz Power, on page B-2
• Excluding North America and Japan, on page B-5
To Next Page
Loading...