CHAPTER 1
Dynamometer Specifications and Requirements
Above Ground Model 200iX/250iX Motorcycle Dynamometer Installation Guide
1-10
GROUNDING REQUIREMENTS
You will need to ground the vehicle to the dynamometer before every run using the vehicle
grounding kit P/N 76100015. Never operate the dynamometer without first grounding the
vehicle to the dynamometer. Refer to “Grounding the Vehicle” on page 5-8.
Always ground the vehicle to the dynamometer. Never operate the
dynamometer without properly grounding the vehicle to the dyno.
PHONE AND INTERNET ACCESS
Dynojet recommends you have a phone close to the dyno to call for assistance in an
emergency. You may also wish to contact Dynojet to troubleshoot your dyno.
Internet access on your computer is desirable for contacting Dynojet and downloading
new information and updates.
TIE-DOWN STRAPS
Dynojet recommends using motorcycle tie-down straps for securing the bike on the
dyno. You will need to provide the tie-down straps.
To Next Page
Loading...
Need help?
General