APPENDIX E
Side and Top Covers—Above Ground iXW Dyno
Above Ground Model 200iX/250iX Motorcycle Dynamometer Installation Guide
E-14
SIDE AND TOP COVERS—ABOVE GROUND IXW DYNO
Before replacing the center panel, be sure to route all your cables and air hoses and
install any additional accessories you purchases. Refer to “Cable Routing” on page 2-
32 and Chapter 3 "Accessories".
1 Secure the eddy current brake side cover to the eddy current brake using the eight
1/4-20 x 5/8-inch screws removed earlier.
Figure E-8: Securing the Eddy Current Brake Side Cover
To Next Page
Loading...