D-7
FOLDING RAMP INSTALLATION
Ramp Installation—Dyno
Version 2 Above Ground Model 200iX/250iX Motorcycle Dynamometer Installation Guide
INSTALLING THE RAMP ON THE DYNO
1 Lower the ramp by pressing on the ramp release with your foot and using the hand
knob to gently lower the ramp to the floor. Be sure to have someone hold the ramp
assembly while lowering the ramp to prevent the assembly from rotating.
Figure D-7: Lower the Ramp
press on ramp
release with foot
hand knob
hold ramp assembly
while lowering ramp
To Next Page
Loading...