C-1
Above Ground Model 200iX/250iX Motorcycle Dynamometer Installation Guide
APPENDIX C
EEC K
IT
I
NSTALLATION
The European Economic Community (EEC) finger guards are a valuable safety device
that allow you to regulate the distance between the dyno chassis and the drum and the
door safety switch provides an added safety measure by automatically activating the
dyno’s air brake when it is triggered.
This appendix provides instructions for installing the EEC Kit to the model
200iX/250iX motorcycle dyno. This appendix will walk you through installing the
EEC finger guards and door safety switch. To ensure safety and accuracy in the
procedures, perform the procedures as they are described.
This Appendix is divided into the following categories:
• EEC Finger Guards Installation, page C-2
• Door Safety Switch, page C-5
To Next Page
Loading...
Need help?
General