0 About this manual
0.3 Additional documents dealing with SmartWire-DT
12 SmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com
0.3 Additional documents dealing with SmartWire-DT
For more information on the subject of SmartWire-DT, please refer to
in the following manual:
• MN05006002Z, SmartWire-DT The System
• MN120006, SmartWire-DT module IP67
• MN05013002Z SmartWire-DT Gateways
• MN05002002Z signal modules (chapter „Diagnostics on the slave“)
in the Installation instructions:
• IL04716001Z, SWD4...: Wiring material and accessories
• IL050001Z, cable adapter ("SWD4-FFR-PF1-1, SWD4-FFR-ST1-1")
• IL05006001Z SWD gateways and power feeder module ("EU5C-SWD-
PF...")
• IL05006002Z SWD input/output modules ("EU5E-SWD-…")
• IL0120005Z, SWD input/output modules ("EU1E-SWD-…, EU2E-SWD-
…, EU1S-SWD-…, EU2A-SWD-…")
• IL0120006ZU SWD input/output modules ("EU6E-SWD..., EU8E-SWD-
...")
• IL120007ZU SWD input/output modules ("EU1HE-SWD...")
0.4 Target group
This manual is intended for engineers, electricians, and automation techni-
cians. Electrical engineering and physics-related knowledge and skills, as
well as advanced familiarity with the field bus being used, will be required in
order to be able to commission the corresponding devices.
In addition, readers must be familiar with how to use the SmartWire-DT sys-
tem.
￫
The aforementioned documents, as well as the manual you are
reading right now, can also be downloaded free of charge from
the Internet in PDF format at:
http://www.eaton.eu/doc
www.eaton.eu/DE/￫ Customer support ￫ Download cen-
ter – Documentation
Enter the document number ("05006002" or "120006", for exam-
ple) or "SWD" into the Quick Search text field.
CAUTION
Installation requires qualified electrician
To Next Page
Loading...
