128 WaveRIDER
5.6.3 WaveRIDER Settings
The M.O.L.E. can be configured to store the name of your company, operator or
machine name.
To select WaveRIDER settings:
1) Connect the M.O.L.E. to the PC (refer to the appropriate section in the Hardware
manual).
2) Select the WaveRIDER Settings command from the WaveRIDER menu.
3) Type a company, operator, or machine name in the text box.
Figure 5- 33: WaveRIDER Settings
4) Click the Send command button to store the information in the M.O.L.E.
5) When the process is complete, a dialog box appears confirming the information
sent. Click the OK command button and the Set M.O.L.E. Clock dialog box
appears for verification of the clock settings. Click the OK command button and
the software will return to the worksheet.
Using this command may cause the M.O.L.E. to lose any previous data collected.
The WaveRIDER Settings command can be accessed on the Toolbars of the
Spreadsheet, Profile, and Admin worksheets.
WaveRIDER Setting Button:
To Next Page
Loading...
Need help?
General
