150 WaveRIDER
6.0 Service and Calibration
General Service Information:
This section covers maintaining and troubleshooting the coupon thermocouples,
software, wiring, and other parts of the system.
The following service instructions are for use by qualified personnel only. Refer
to the summary and service safety summary prior to performing any service.
6.1 Service Troubleshooting
Check the appropriate section of the manual to be sure you’re following the correct
procedures.
Decide if the problem is with the RIDER, SuperM.O.L.E. Gold, or Software.
Once it has been determined what item is causing the problem, refer to the appropriate
service section. Problems that are more likely or more easily corrected are listed first in
each section. Start at the top of the list and work your way down. If the problem is still
unresolved go to section 6.4 How to Get Additional Help.
To Next Page
