ECD WaveRIDER Series User Manual

16 WaveRIDER
2.4 M.O.L.E. Installation
When inserting the M.O.L.E. into the WaveRIDER, make sure it is properly connected to
the RIDER thermocouple bridge and the configuration plug is secure.
Figure 2- 10: M.O.L.E. Installation
To remove, pull the extractor handle up and slide the M.O.L.E. away from the connector
bridge.
M.O.L.E.
CONNECTOR BRIDGE
CONFIGURATION PLUG
EXTRACTOR HANDLE

ECD WaveRIDER Series Specifications

General

Brand	ECD
Model	WaveRIDER Series
Category	Measuring Instruments
Language	English