WaveRIDER 41
4.3.5 Data Run Rows
All of the data runs uploaded into a workbook file are listed on the Spreadsheet
worksheet as individual rows. The first data run uploaded into the workbook file is on the
bottom and the most recent data run uploaded is on the top.
When any data run row is selected, all of the cells in the entire row are highlighted in
purple and blue. The purple cells indicate that the cells can be modified and the blue
cells indicate the data cannot be modified.
When any individual data cell in a data run row is selected, all of the cells in the entire
row are highlighted in green and yellow. The green cells indicate that the cells can be
modified and the yellow cells indicate the data cannot be modified.
The data run rows can also be moved into any order desired. This is useful when the
user wants to place similar data runs together.
To change the order of the data run:
1) Select the number cell of a data run row with the mouse pointer. The row will
then become highlighted in purple and blue.
2) Drag the row and drop it to a desired location.
Figure 4- 13: Drag and Drop Data Rows
4.3.6 Selected Run
When a data run row is selected, the data for that row will be shown in the Sel= row
located at the bottom of the data run rows. This row also allows the user to easily
compare the selected data row to the statistics calculations located below the selected
run row.
Entire selected rows and columns can be “copied” by pressing keys (CTRL + C)
and then “pasted” (Ctrl + V) into other spreadsheet applications.
To Next Page
Loading...
Need help?
General
