EasyManua.ls Logo

Ecotech Serinus 30 - Easy Maintenance

Ecotech Serinus 30
254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TÜV Rheinland Energie und Umwelt GmbH
Luftreinhaltung
Report on the performance testing of the Serinus 30 ambient air quality moni-
toring system manufactured by Ecotech Pty Ltd measuring CO, Report no.:
936/21221977/D_EN
Page 37 of 253
EP_Ecotech_Serinus30_en.docx
6.1 4.1.2 Easy maintenance
Necessary maintenance of the measuring system should be possible without larger
effort, if possible from outside.
6.2 Equipment
No additional equipment is required.
6.3 Testing
The necessary regular maintenance tasks were performed in accordance with the instruction
manual.
6.4 Evaluation
The user shall perform the following maintenance tasks:
1. Checking of the instrument status
The status of the instrument can be checked and monitored by way of visual inspec-
tion of the display.
2. Checking and replacing the particulate filter at the sample gas inlet.
The frequency with which particulate filters need to be replaces depends on the dust
concentration in the ambient air.
6.5 Assessment
Maintenance can be carried out with usual tools in a reasonable time and from the outside.
Does this comply with the performance criterion? yes
6.6 Detailed presentation of test results
Maintenance tasks were performed during the test and in accordance with the tasks and pro-
cedures described in the manual. Complying with these procedures, no difficulties were iden-
tified. Until now all maintenance tasks were performed easily by means of usual tools.

Table of Contents

Related product manuals