Edwards nEXT730D User Manual

Table 44 PRX purge restrictor
Item
Item Number
PRX10 purge restrictor B58065001
14.8 Interface cable
An interface cable connects the nEXT pump to a PC. Serial commands are then used to
control and monitor the nEXT pump.
Table 45 Interface cable
Item
Item Number
nEXT Interface cable B80000808
14.9 nST2 PC program
The nST2 PC pr
ogram is PC-based soware that can be used with the nEXT pump, either
via the serial interface or via the USB service port.
It can be used to control, monitor, congure and data log the nEXT pump, and also to
view service status, reset service intervals and upgrade the soware embedded in the
motor controller.
This soware is available for download from the Edwards upgrades website:
www.upgrades.edwardsvacuum.com
14.10 Auxiliary connector
Enables the use of accessories that do not come prewired with a mang plug. Cable
length is 1.5 m.
Table 46 Auxiliary connector
Item
Item Number
nEXT auxiliary connector B8G200839
14.11 Auxiliary extension cable
The cable e
xtends the distance of the accessory to the pump and benets from a right
angled plug to accommodate installaon where space is limited. Cable length is 0.2 m.
08/2021 - ©Edwards Limited
Page 112B8J200880_D
300812671_002_C3
B8J200880_D - Accessories

Edwards nEXT730D Specifications

General

Brand	Edwards
Model	nEXT730D
Category	Water Pump
Language	English