Edwards nEXT730D - Page 21

To congure the pump, either use a customer simple serial system via the serial link, or
use the E
dwards TIC Turbo Controller, TIC Turbo Instrument Controller or TAG Controller.
The TICs have a feature which allows storage of a nEXT pump’s conguraon. The
conguraon can then be downloaded to another nEXT pump. This is useful when
conguring a number of nEXT pumps with the same sengs before they are ed to a
system.
The USB service port can also be used in conjuncon with the Edwards nST2 PC soware
to congure the nEXT pump. The conguraon can then be downloaded to another
nEXT pump, in the same way as it can with a TIC, which is useful when conguring a
number of nEXT pumps.
08/2021 - ©Edwards Limited
Page 21B8J200880_D
300812671_002_C3
B8J200880_D - Overview